翻訳と辞書
Words near each other
・ Honduran general election, 1981
・ Honduran general election, 1985
・ Honduran general election, 1989
・ Honduran general election, 1993
・ Honduran general election, 1997
・ Honduran general election, 2001
・ Honduran general election, 2005
・ Honduran general election, 2009
・ Honda VFR750F
・ Honda VFR750R
・ Honda VFR800
・ Honda Vigor
・ Honda Vision
・ Honda VT series
・ Honda VT1100
Honda VT250
・ Honda VT250F
・ Honda VT500
・ Honda VT600C
・ Honda VTR1000F
・ Honda VTR250
・ Honda VTX Series
・ Honda Wave series
・ Honda WOW
・ Honda X11
・ Honda X4
・ Honda X8RS
・ Honda XBR500
・ Honda XL1000V Varadero
・ Honda XL125V Varadero


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Honda VT250 : ウィキペディア英語版
Honda VT250

The VT250 or Spada MC20 was a Honda motorcycle built between late 1988 and the end of 1989.
The Spada's handling was enhanced due to its "CASTEC" cast aluminium frame, which is lighter and over 30% stiffer than the previous steel version. It was geared to a theoretical top speed of at a 13,500 rpm redline. However the speedometer records an optimistic maximum of 180 km/h. Note that these figures are directly calculated from the gear and reduction ratios of the Honda Spada Workshop Manual. Tyre height is approximated at 70mm.
The VT250 Spada used Nissin brakes, Enkei wheels and a Showa rear-shock. It was designed by Mitsuyoshi Kohama, the designer also responsible for the first Fireblade, the NR750 and the Hornet. The model was principally marketed in Asia, Australia and New Zealand, although used models can also be found further afield, including Europe. Following the VT250 Spada, the Honda VTR250 was produced, which had a lower power output of and a trellis frame in place of the cast aluminium frame.
==Predecessor==
The VT250F is a semi-faired, sport bike first produced by Honda in 1982.
The motorcycle had a DOHC 4-valve-per-cylinder, 90-degree water-cooled V-twin engine, which significantly reduced primary vibration when compared to inline twin engines used on similar machines. The V-twin engine also allowed the motorcycle to have a low centre of gravity and a low seat height.
The front brake was a single inboard ventilated disc that was developed to improve brake performance and feel. This was only seen on Honda models for a few years, before a switch to sintered metal brake pads with the more traditional disc/caliper arrangement. Other features included a hydraulic clutch, Comstar wheels with tubeless tyres, TRAC anti-dive front forks and Pro-Link rear suspension. Engine coolant passed through one of the frame tubes. The early UK specification model had built-in front fairing indicators, and optional radiator side-cowls and belly pan. Following the VT250F, the VT250 Spada and VTR250 were produced.

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Honda VT250」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.